Naar de inhoud van de pagina

Rockboard PatchWorks Patch Cable CR

3.6 van de 5 sterren van 26 klantbeoordelingen

Soldeerloos patchkabelsysteem

  • Set voor 5 patchkabels
  • Bevat 10 stekkers en 3 m kabel
  • Uniek 2-delig 2-weg connectorontwerp (patent aangevraagd)
  • Kan worden geconfigureerd als een rechte of haakse stekker
  • Plug'n'Play-ontwerp - geen strippen van de kabel nodig
  • Afmetingen rechte jack (L x B x H): 20 x 12 x 10 mm
  • Afmetingen haakse jack (L x B x H): 15 x 13 x 10 mm
  • Vergulde contacten
  • Chrome afwerking
  • Lage kabelcapaciteit voor maximale signaaltransparantie
  • Flexibele zuurstofvrije koperen geleider 7 / 0,16 mm
  • Stijve PE-isolatie
  • Gevlochten vertind koperen scherm 6 x 16 / 0,12 mm
  • Zwarte PVC kabelmantel
  • Capaciteit geleider / scherm minder dan 8 pF / decimeter
  • Geleiderweerstand minder dan 4 mOhm / Decimeter
  • Werktemperatuur: -15 ° C tot +70 ° C
  • Diameter: 4 mm
  • Inclusief TX8 sleutel, kabelsnijder en 10 reserve schroeven
  • Leverbaar sinds Augustus 2018
  • artikelnummer 444365
  • verkoopseenheid 1 stuk
  • Colour Black
  • Connector 1 Jack 6,3mm TS male
  • Connector 2 Jack 6,3mm TS male angled
€ 39
Alle prijzen incl. btw
Direct leverbaar
1

26 Klantenbeoordelingen

3.6 / 5

afwerking

22 Recensies

T
handig systeem, maar...
Tonebusters 09.11.2020
Handig systeem maar je moet de kabeltjes écht heel goed aanduwen voor je ze vastzet anders toch nogal een 'dropouts'...
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
i
Perfect
ivoi.iovi 21.12.2020
Effortless cables of all lengths. The construction of the jack pieces is excellent. Making straight-end cables is super fast, and it is only a little more fiddly to set them angled. I got these partly just for board planning, and it's great to just experiment with different neat setups without having to commit to soldering a cable. Even now that I'm ready to set and forget my board, I see no reason to replace some of the cables I've made as I am getting no noise at all and no noticeable degradation in signal.
In fact, I will order another set of these just so that I have a load of spares for any time I need to experiment or just make a fast replacement cable if a soldered cable fails.
I'm very pleased and see no cons.
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
J
Perfect neat solution for a pedalboard
Janice 19.07.2019
The cable + plugs are good quality - very neat plugs with a small footprint and a choice of angled/straight orientation. It's very easy to make up the leads. They made a neat job of wiring up a small pedalboard.

The only downside is that before the cables are made up, the screws in the plugs have nothing to bite on and are prone to working loose and dropping out, so you have to be careful not to lose them when opening the packaging. Once the cables are made up there is no problem, they are very solid.
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
G
Awful.
Grrrrr. 11.08.2025
I bought 3 packs of these to cable up my pedalboard. Big mistake.
I spent a bit of time putting together the first 5 before trying any of them, they all failed (right angle one side, straight the other).
I got my multimeter out and the tips all worked, but due to the screw going through the wire to hold it in place the body was shorting them all out.
I managed to get a couple working, but only the straight to straight ones.
Very, very frustrating and a complete waste of over £100 and my time.
Not a happy bunny.
afwerking
0
0
Evaluatie melden

Evaluatie melden