Naar de inhoud van de pagina

Digitale 2-kanaals draadloze microfoon

  • Geschikt voor camera, smartphone, iPhone en computer
  • Twee zendermodules (TX) met geïntegreerde condensatormicrofoon (omnidirectionele capsule) en één ontvangermodule (RX) met headset-aansluiting voor een derde microfoonsignaal
  • Kosteloze en registratievrije 2,4 GHz band
  • Maximaal geluidsdrukniveau: 123,5 dB SPL (interne microfoon)
  • Frequentiebereik: 50 - 20.000 Hz (interne microfoon)
  • Bereik: 260m met vrije zichtlijn
  • 3,5 mm TRS-aansluiting op de zender voor een externe lavalier-microfoon
  • Intelligente GainAssist automatische niveauregeling
  • Aansluiting met buitenschroefdraad voor het vastzetten van de Lavalier II
  • 32-Bit-float-opname in de zendermodule - meer dan 40 uur geheugen
  • Ontvangermodule met USB-C-aansluiting en 3,5 mm TRRS-aansluiting
  • Met LC-display voor het weergeven van verbinding, niveau, oplaadstatus en modus
  • Kan worden gebruikt als hoofdtelefoonuitgang, uitgang naar de camera of headset-aansluiting
  • Stroomvoorziening via interne lithium-ion batterij
  • Batterijcapaciteit: max. 7 uur
  • Afmetingen (per module): 46,5 x 44 x 20 mm
  • Gewicht (zender): 35 g
  • Gewicht (ontvanger): 36 g
  • Incl. drievoudige USB-laadhub, 3,5 mm TRS-verbindingskabel SC2, USB-C naar Lightning-kabel SC21, USB-C naar USB-C-kabel SC22 en 3 x bont windkap en neopreen draagetui
  • Leverbaar sinds December 2024
  • artikelnummer 606542
  • verkoopseenheid 1 stuk
  • Capsule Type Condenser
  • Microphone Colour Black
  • Receiver Type mobile
  • Frequency 2400 MHz
  • Transmission system Digital
  • Channels Lapel Microphone 2
  • Dante No
  • Transmitting System Digital
  • Pattern omnidirectional
  • Wireless Channels 2
  • Handheld Transmitter 0
  • Pocket Transmitter 2
  • Microphone Plug Transmitter 0
  • Power Transmitter Li-ion Battery
  • Receiver Width in mm 44 mm
  • Receiver Height in mm 20 mm
  • Multi Channel No
  • Microphone Type Lapel Omnidirectional
  • Transmitter Input 3,5mm TRS
  • Receiver Weight in kg 0,036 kg
  • Hot Shoe Adaptor No
  • Power Receiver Li-ion Battery
  • Removable Antenna No
  • Battery Status Monitor Yes
  • Output 3,5mm TRS
  • Charging System Yes
  • Rackkit No
  • Integrated battery Yes
Gratis meegeleverd met dit product
€ 179
Alle prijzen incl. btw
Direct leverbaar
1

3rd-gen freedom for filmmakers

Rode presents the third generation of its Wireless GO system, a compact and intuitive dual-channel wireless microphone solution for filmmakers, presenters, musicians, and content creators at large. The Wireless GO (Gen 3) consists of a receiver with a 3.5mm headset output and two transmitters, each equipped with a built-in omnidirectional microphone and 3.5mm input for external lavaliers. Available in 12 vibrant colors – including black, white, pink, blue, and more – the system allows users to match their gear to their style or environment. The system allows simultaneous 2.4GHz transmission and 32-bit float internal recording, offering increased headroom and near-elimination of distortion. Up to 40 hours of audio can be stored internally in three selectable modes, and GainAssist technology automatically adjusts input levels in real time, ensuring clean recordings in any environment – whether indoors or outdoors.

Two transmitters and one receiver of the Rode Wireless GO (Gen 3) digital 2-channel wireless microphone system

Transmission and recording

Each transmitter features a built-in omnidirectional condenser microphone, capturing sound evenly from all directions. This ensures every voice is recorded clearly, no matter where it comes from – making the system ideal for quick setups, interviews, or dynamic environments. For more tailored audio capture, users can connect an optional lavalier microphone or a headset mic via the 3.5mm input on each transmitter. A dedicated record button next to the microphone provides instant start/stop control, while a phase inversion switch on the underside resolves any alignment issues. The receiver supports three recording modes: Merged Mode combines both signals into a single track, Split Mode records each signal separately for individual editing (separate tracks), and finally Safety Channel creates a backup track at -10 dB, ensuring distortion-free audio even if unexpected volume spikes occur.

Rear clip mounts of the Rode Wireless GO (Gen 3)

Flexible and reliable

Designed for video professionals, journalists, and mobile filmmakers, the Rode Wireless GO (Gen 3) prioritizes ease of use without sacrificing performance and provides an intuitive solution for capturing audio in spontaneous settings – whether on the way to a concert, during band rehearsals, or in the studio. Since no technical expertise is required, it is perfect for fast-paced environments where reliability is key. The system is compatible with Android, iOS devices, computers, and cameras, and its 260m line-of-sight range ensures stable transmission even over long distances. For added security, the Safety Channel records a second track at -10 dB, providing a backup track for unexpected volume spikes.

Rear clip mounts of the Rode Wireless GO (Gen 3)

About Rode

Founded in Sydney, Australia in 1990, Rode is a specialist in high-quality studio microphones. With its very first in-house, completely Australian-built model, the NT2 large-diaphragm microphone, the company created a classic which is still produced in its current and enhanced version, the NT2-A. An extensive range of studio and live microphones has also been added, regularly updated, and expanded over the years. These new additions include a variety of professional microphones which are designed for video and mobile applications and can be connected directly to SLR cameras or smartphones.

Highly adaptable and versatile

The receiver unit of Rode Wireless GO (Gen 3) outputs audio in either digital or analogue format – via the USB-C port or the 3.5mm output jack – and simply connects with cameras, smartphones, or other recording devices. Users of other Rode Series IV wireless solutions can pair the transmitters with devices like the Rodecaster Pro II or the Rodecaster Video. Thanks to their innovative clip design, the transmitters can be securely mounted on belts, pockets, collars, or cold shoe adapters such as the Rode DCS-1. All components are powered by built-in lithium-ion batteries, providing up to seven hours of operation on a full charge.

Top-down view of the Rode Wireless GO (Gen 3) microphones

In the spotlight

Opmerkingen in betrek op de ondersteunde frequentiebereiken

Hier vindt u informatie welk frequenties door dit draadloos systeem ondersteund worden en in welke landen ook in de toekomst voor draadloos gebruik toegestaan zijn.

De juistheid van de gegevens kan niet worden gewaarborgt.!

3 Klantenbeoordelingen

5 / 5

bediening

features

afwerking

2 Recensies

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
aa
Great package
always an engineer 03.07.2025
Purchased to do some video work, but also to use to transmit some PC sound to a digital stage mixer. I also plan to use as stand alone mini recorders for recording lectures/talks. For the video work, it has worked well so far. I do like the USB C charging branch, capable of charging all transmitters and receivers from one port. Also a spare dead cat for a transmitter is welcomed. The treaded 3.5mm sockets will also be useful.
Simple to use, with good clear display. Handy pouch, which is just big enough. I really can't complain.
bediening
features
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate de
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
N
RODE GO 3. GEN.
Norbert580 29.05.2025
SCHNELL EINSETZBAR UND TOP QUALITÄT. FÜR SCHNELLE INTERVIEWS UND VERTONUNG !
bediening
features
afwerking
0
0
Evaluatie melden

Evaluatie melden