Kemper Profiling Amplifier Po B-Stock

B-Stock met volledige garantie
Geretourneerd product met lichte gebruikssporen

Versterker

19'' versie
De Kemper profileringstechnologie stelt u in staat om een precieze geluidssnapshot van een bestaande versterkerset-up te maken inclusief speakerkabinet en microfoon(s)
Deze snapshot kan dan zelfs nog verder worden aangepast dan de originele mogelijkheden van de versterker door interne processoren zoals meerdere 'stomp-effect emulaties' (tot 4 gelijktijdig), master effecten, equalizer, gain, amp defintion, power sagging etc.
De Kemper Profiling Versterker is al voorzien van verschillende gedetailleerde versterkingsprofielen, dus u hoeft niet per se uw eigen profielen te maken
Gebruik de geluidssnapshot ter oefening, in de studio of op het podium zonder met zware uitrusting te zwoegen
Verbindingen: microfooningang, lijningang, alternatieve uitgang, directe uitgang, monitoruitgang, masteruitgang (stekker en XLR), S/PDIF digitale ingang en uitgang, midi-ingang/-uitgang/-thru)
2 Footswitch (Jack), netwerk en kabel
Inclusief 600W klasse D stroomversterker (600W @ 8 ohm, 300W @ 16 ohm)
Afmetingen (BxHxD): 48,3 x 13,9 x 22 cm
Gewicht: 6.18 kg
Kleur: zwart

30 dagen Money-back garantie

Drie jaar Thomann garantie

Leverbaar sinds Juni 2013
artikelnummer 628266
verkoopseenheid 1 stuk
Design 19"
Tube(s) Yes
Amp Modeling Yes
Effects Yes
Headphone Output Yes
Direct Out Yes
MIDI Interface Yes
Integrated Expression Pedal No
Connections for Pedals or Switches Yes
Aux-Input Yes
Integrated Tuner Yes
USB-Port No
Drum-Computer No
Powerrate in W 600 W
Reverb Yes
Integrated Effects Yes
MIDI Connector(s) Yes
Aux Input Yes
USB Connection Yes

ook als nieuw beschikbaar. € 1.698

€ 1.489

Alle prijzen incl. btw

191

Best seller rang

in gitaren voorversterker

The new generation of guitar amplifiers!

For a long time now, many guitar amp manufacturers have been on a quest to pack the sound of the world’s most legendary amplifiers into a single unit – none of them with any real success until, in 2012, Kemper opened a new chapter in amp history with its Profiling Amplifier. Using the entirely new and unique “profiling” technology, the sound of any desired amplifier can be recorded with a microphone and then further edited and shaped in the Profiling Amplifier PowerRack. The Kemper’s high-performance electronics and high-quality DSP effects, extensive routing options, wide selection of cab and microphone models, and intuitive user interface – styled after that of a real guitar amplifier – let you revive these legendary sounds, enhance them with contemporary features, and store them permanently: An ingenious concept that has ushered in a new era in guitar amplification.

The best guitar amps of all time, emulated to perfection

The search for that perfect amplifier ends with the Kemper Profiling Amplifier PowerRack thanks to its profiling technology, which gives guitarists countless amp models at their fingertips and also lets them directly record and preserve the sonic characteristics of any amplifier they want: In other words, the boundaries of flexibility have now been completely re-drawn. Innumerable other digital editing options make the Kemper Profiling Amplifier PowerRack without a doubt one of the most flexible guitar amplifiers on the market. When paired with the right speaker cab, the PowerRack’s integrated 600-watt class D power amp is also ready to unleash the fury on stage.

An ultra-flexible powerhouse for tone-chasers with pro aspirations

The Kemper Profiling Amplifier PowerRack comes in a studio-friendly 19” format and is ready for whatever challenges are in store, so there can be no doubt that this is a thoroughly professional piece of equipment. Fans of old vintage treasures can now harness the sound and characteristics of the originals – which are usually ruinously expensive and often very rare – and shape these to suit their own tastes without having to spend a fortune getting their hands on the real thing first. This powerhouse amp will delight tone-chasers and sound nerds alike with its extensive range of features and win over recording musicians with its impressive connectivity, which allows it to replace numerous guitar amps in the studio and ultimately save everyone a large amount of time and effort when it comes to cabling and miking. Once it’s in your rack, you won’t want to switch it off again.

About Kemper Amps

German firm Kemper Amps, or rather its founder Christoph Kemper, is no stranger to the music industry. His very first product, the virtual-analogue Access Virus synthesizer, was far ahead of its time and brought the company both unexpected success and an impressive reputation within the music profession. Continuing the momentum of this success, the company then developed the “Profiler” technology, which allows an astonishingly realistic reproduction of the sound of a miked amplifier to be made and thus represents the dawn of a new era in digital amplifier simulation. This technology is currently available in different variants of the Kemper Profiler system: As a basic head, as a top with a powerful Class-D power amp integrated, as a rack-mountable unit, and even as a floorboard.

The Profiler is up for anything

Whether it’s right next to the mixing desk in your studio rack, on stage with 600 watts of pure power behind it from the integrated class D power amp, or in your living room for some quiet practice, the Kemper Profiling Amplifier PowerRack’s outstanding flexibility means that the amp’s potential knows no limits other than those of the player’s imagination. The wide range of connection options include on-board digital interfaces, such as an S/PDIF input and output and two USB outputs, which make it easy to record the Profiling Amplifier PowerRack’s signal to a DAW with zero loss in the studio. The Kemper Profiling Amplifier PowerRack comes with presets of many of the best amplifiers of all time already installed, however, so your quest for the perfect tone can begin right away.

The ideal accessory: The Kemper Remote

The Kemper Profiler Remote is a floorboard that is compatible with every amp in the Profiling series and can be used to remotely control and enhance all of the Kemper’s key functions, making it the perfect addition to any setup. It features a built-in tuner, four connections for expression pedals, and a large display that provides a clear overview of the presets and effects that are currently selected. What is more, the remote can also be used to control the Profiling Amplifier’s looper function, and its “Morph” function is a highly practical feature that can be used to seamlessly crossfade between one or more parameters – making the transition from a dry crunch to a lead sound with delay as simple as pressing a footswitch, for example.

In the spotlight: Profiling

In fundamental terms, the Kemper Profiler is primarily a highly specialised measuring device which, by means of a complicated algorithm, is capable of precisely replicating the tonal characteristics of a signal chain. Generally, this chain first and foremost includes the amplifier that is to be emulated, the cabinet to which this is connected, and the microphone that is placed in front of it. This standard setup can additionally be expanded by adding pedals, which can also be profiled as part of the chain if desired. An “amp only” profile can of course be created, however, by connecting the amplifier to a DI box instead of a conventional speaker cabinet. To determine the characteristics of the individual signal chain, the Kemper then sends various measurement signals through the amplifier that is connected, on the basis of which it then creates a so-called “profile” – which even professional musicians have difficulty in distinguishing from the original in terms of sound and dynamics. The user can subsequently customise this profile by fine-tuning a range of different parameters before naming and saving it. In this way, players can archive their entire amplifier collection virtually without restriction and take it with them to gigs and into the studio.

Met liefde geserveerd!