the t.bone Ovid System Drum Bundle

Pakketaanbieding bestaande uit

the t.bone Ovid System CC 100

Condensator clip-microfoon voor het Ovid systeem

Karakteristiek: cardioïde
Frequentiebereik: 20 - 20.000 Hz
Flexibele zwanenhals voor eenvoudige opstelling van het instrument
3-Polige mini XLR-plug voor gebruik met t.bone wireless systemen (ook voor AKG wireless systemen geschikt)
Lengte van de zwanenhals: 130 mm
Lengte van de kabel: 2 m
Eenvoudige Installatie met verschillende instrumentenhouders (niet inbegrepen)
Incl. XLR phantom adapter (fantoomvoeding benodigt) en schuimstof windscherm

the t.bone Ovid System Drum Clip

Drum clip

Modulaire drum-microfoonhouder voor het Ovid Systeem
Bevestig 'm eenvoudigweg aan de rim van de ketel

the t.bone Ovid System Case

Kunststof Koffer

Met uitsparing voor alle Ovid System microfoons en de CC100 mic
Externe afmeting: 30 x 23 x 7.5 cm

30 dagen Money-back garantie

Drie jaar Thomann garantie

Leverbaar sinds November 2013
artikelnummer 327505
verkoopseenheid 1 stuk
Microphone Set For Guitars No
Microphone Set For Drums Yes
Microphone Set For Vocals & Speech No
Microphone Set For Cameras No
Microphone Set For Wind Instruments No
Incl. Clip On Mount Yes
Condenser Microphone Yes

€ 77

Alle prijzen incl. btw

Best seller rang

in microfoonsets

A clip mic that won't get in the way

The Ovid System CC 100 from the t.bone is a condenser clip microphone for recording musical instruments. Its cardioid polar pattern ensures that the sound of the respective instrument is picked up directly, and as it is designed for the t.bone's Ovid system and features a three-pole mini-XLR connection as its signal output, it is suitable for use with wireless systems from both the t.bone and AKG. As a condenser microphone, the CC 100 of course requires phantom power, so the scope of delivery includes an XLR phantom adapter that can also be used to connect the mic to a mixing desk, and the integrated 2m cable additionally allows a high degree of freedom. Altogether, this range of features makes the t.bone Ovid System CC 100 an affordable microphone for recording instruments with a direct, high-quality sound. This bundle includes a clip for attaching to a drum as well as a transport case.

Plastic case for the t.bone Ovid System drum bundle

Optimum signal transmission

The t.bone Ovid System CC 100 covers a frequency response from 20Hz to 20kHz with a maximum sound pressure level (SPL) of 110dB. The mic's sensitivity is 8.7mV/Pa, which means that slightly more amplification is required for an optimum signal transmission than in the case of a microphone with a high sensitivity level. Thanks to its signal-to-noise ratio of just 73.7dB, the proportion of noise in the signal is also minimised. It should be noted, however, that this microphone must be handled with the utmost case, as even dropping it can result in severe damage. For this reason, the microphone should always be stored in the supplied microphone case when not in use. A damp cloth is recommended for cleaning.

the t.bone Ovid System CC 100 condenser microphone

Direct recording for instruments

This extremely compact clip microphone, which weighs just 88 grams, is ideal for miking up instruments during live performances, where users will certainly appreciate both its small design envelope and wide frequency response, while its cardioid polar pattern will keep the signal virtually free from unwanted sound from sources in the background. Apart from the drum clip included in this bundle, a range of instrument clips can also be ordered separately to allow the CC 100 to be attached directly to various acoustic (e.g. brass) instruments. By adding a wireless transmitter to the setup, musicians can then move around freely on stage without having to pay attention to how far their instrument is from the microphone. What is more, the scope of delivery additionally includes a foam windshield to prevent the occurrence of unwanted noise when the microphone is moved around.

the t.bone Ovid System CC 100 with accessories

About the t.bone

Since 1994, the t.bone has been one of Thomann’s in-house brands, and its name can be found on devices such as headphones, wireless systems, in-ear equipment, and various microphones and matching accessories. “the t.bone” products are made exclusively by renowned companies who also manufacture products for other well-known brands. This provides a clear advantage: Brand-quality products at very reasonable prices. And word gets around: One in seven Thomann customers has already bought at least one product from the t.bone.

Flexible connectivity

The bottom of the t.bone Ovid System CC 100's gooseneck tapers off into a removable 2m cable, which features a three-pin mini-XLR plug that can be connected to the t.bone CC 100 EW phantom adapter and is lightweight enough to be pleasantly inconspicuous. The adapter in turn allows the microphone to be connected to a mixing desk, a multi-track recorder, or an audio interface, while the t.bone's optionally available Ovid System HD Cable EW lets the user connect it to Sennheiser's EW-series wireless systems. Last but not least, the gooseneck itself, which is 13cm in length, makes it possible to precisely align the t.bone Ovid System CC 100 microphone to its sound source.

Met liefde geserveerd!