Naar de inhoud van de pagina

Multi-netvoeding voor effectpedalen

  • Maximale totale stroomafgifte: 3,400 mA
  • Twee ringkerntransformatoren en geavanceerde filtertechnologie voor zuivere stroom zonder achtergrondgeluid
  • 12 Volledig onafhankelijke, galvanisch geïsoleerde uitgangen voor 2,5 mm x 5,5 mm holle connectors met polariteit (-) binnenin
  • 1x Instelbare spanning (9 V, 12 V, 15 V, 18 V) belastbaar met 300 mA
  • 2x Onafhankelijk 9 V elk belastbaar met 500 mA
  • 3x Onafhankelijk 9 V elk belastbaar met 300 mA
  • 6x Onafhankelijk 9 V elk belastbaar met 200 mA
  • IEC AC-ingang
  • Selecteerbare ingangsspanning (110V~120V en 220V~240V) voor gebruik in verschillende regio's
  • Status-LED voor elke uitgang
  • Overspanningsbeveiligingsfunctie
  • Afmetingen (L x B x H): 225 x 88 x 5 mm
  • Gewicht: 1,82 kg
  • Incl. stroomkabel (6x 460 mm, 6x 610 mm), kabel voor polariteitsomkering (1x 200 mm, rode connectors), stroomkabel en klittenband
Let op! Registreer uw aankoop op shop.warwick.de/en/warranty-registration voor een verlengde garantie van 4 jaar.
Leverbaar sinds Juni 2018
artikelnummer 440144
verkoopseenheid 1 stuk
DC/AC current DC
Output current in mA 3400 mA
9 V Yes
12 V Yes
18 V Yes
Secondary voltage Yes
Multi-output power supply Yes
€ 157
Alle prijzen incl. btw
Direct leverbaar
Direct leverbaar

Dit product is op voorraad en kan direct verzonden worden.

Informatie over de verzending
1

68 Klantenbeoordelingen

4.7 / 5

U moet ingelogd zijn om producten te evalueren.

Note: Om te voorkomen dat evaluaties gebaseerd zijn op roddel, geruchten of heimelijke advertentie staan wij op onze website alleen evaluaties toe van daadwerkelijke gebruikers die het geevalueerde product bij ons gekocht hebben.

Na inloggen vindt u alle producten die u kunt evalueren ook onder “Product evalueren” in uw klantencentrum.

afwerking

43 Recensies

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
T
No more noise
Terrains 21.12.2020
My pedalboard is silent (in a good way) since upgrading to this power supply. No more noisy pedals. It's a solid and reliable power supply, which is all you really want.

It's chunky, so might not fit under every board, and it's heavy - but I find that reassuring... If you trod on it somehow I think the only damage would be to your foot. The kettle plug connector is also handy, you always have a spare power lead to hand. Good range of inputs and always useful to have a variable voltage input.

The only negative is there's no kind of mounting bracket for this power supply that I can find.
afwerking
2
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
f
The last power supply you'll ever need (maybe)!
freakinpete 27.09.2018
I bought this power supply to replace a smaller capacity supply that was starting to give problems - I added an EHX Oceans Eleven to my board and it pushed the Harley Benton Powerplant over the edge. This supply is excellent - it has isolated outputs to support even the most demanding pedal, and one adjustable voltage output, so should be flexible enough to support most boards.
This supply is slightly bigger and heavier than the Harley Benton Powerplant, and it lacks an actual on/off button. I still managed to fit it under my board, and it's working great. I don't think I will ever need to replace or upgrade this power supply.
afwerking
1
1
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
B
It’s broken…!!!
B.Col 25.07.2024
I bought this product 4 years ago… and now it’s broken.. one should bear in mind that this is not cheap and I would expect it to last a lot longer than 4 years.. so what happened ?
It’s been sitting under my pedal board doing its duty, completely protected and mounted securely using Velcro and cable ties. The socket where the kettle lead plugs in is clearly visible and was easy to connect. However the power began to cut out, which is not exactly great during a gig. But fiddling with the mains cable a bit would bring it back to life, but only for a while and the problem would continue. So in short it’s now pretty useless.
I contacted Mooer via email and asked them if they could fix it… they sadly did not respond to my mail…
So I decided to have a look myself.. I thought maybe there’s a lose wire ?? But no, the socket appears to be mounted directly onto a circuit board and I’m not messing with that. In my view it seems not a good idea to have something that is pushed every time you plug the mains in to be mounted in this way.
Anyway I’m not happy, it’s an inbuilt fault just waiting to happen..
My advice would be to buy something else… I’m going to buy the Harley Benton power plant ISO 2 Pro to replace it… I’ve already been using one of these for several years and it’s been faultless…
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
Ts
Made my life much easier and hum free.
Tin s 03.03.2019
Until now I've powered my pedals with batteries and 9v adapters, the adapters sometimes cause hum and the batteries are a pain in the a**, first because they die on you when you least expect and second, you have to unplug all your pedals so you don't drain the battery...
Now its all neat, connected and ready to play when ever I want.
The build quality is just great and the 12 isolated outputs are more than enough, in the price range and above it, it beats everything.
12v and 18v switch for the one output is a really great feature for those rare pedals that use it.
The power supply can be used all over the world since there is a 110-220v switch in the back.
It sure made my life much easier and it will make yours too, I bet on it.
afwerking
0
0
Evaluatie melden

Evaluatie melden