Korg nanoKONTROL Studio

Start 360°

MIDI-controllers voor mobiele apparaten en computers

Aansluiting via USB of Bluetooth / draadloze
32 (8x4) verlichte knoppen Mute, Solo, Rec, Selecteer
8 toewijsbare knoppen
8 definieerbare faders
Jogwheel
Verlichte bedieningselementen transport
Voeding via USB-bus of 2x AA batterijen
Afmetingen (B x D x H): 278 x 160 x 33 mm
Gewicht: 459 g
Systeemvereisten: Windows 8.1 of hoger (32 of 64 bit), Mac OS
X10.10 Yosemite of hoger, iOS8 of later, Bluetooth 4.0
incl. KORG Legacy Collection M1 Le software synth en USB-kabel

30 dagen Money-back garantie

Drie jaar Thomann garantie

Leverbaar sinds Juni 2016
artikelnummer 379595
verkoopseenheid 1 stuk
USB Yes
Bluetooth Yes
5-pole DIN MIDI No
Ethernet No
Fader 8
Rotary Encoders 8
Audio I/O No
Transport Function Yes
Footswitch connection No
Foot Controller Connection No
Bus-Powered Yes
Jog Yes
Joystick No
Additional Features USB connector, usable with batteries

€ 139

Alle prijzen incl. btw

Best seller rang

in DAW controller

Bundels & aanbiedingen

Creëer uw eigen bundel

vanaf € 325

Tot 8% korting

88 Klantenbeoordelingen

5 39 Klanten 4 27 Klanten 3 9 Klanten 2 5 Klanten 1 8 Klanten

4 / 5

bediening

features

afwerking

Review richtlijnen

63 Recensies

Betaalbaar en super Functioneel

Studio Eleven 07.05.2020

Als je op zoek bent naar een betaalbare en zeer functionele controller dan is deze Korg Nano Studio een echte aanrader. Enkel de Micro USB aansluiting laat te wnsen over en is al na een paar gebruiken stuk. Jammer dat Korg daar geen betere oplossing voor heeft bedacht

Evaluatie melden

Bent u van mening dat deze evaluatie om een of andere reden onjuist of onacceptabel is? Geef ons s.v.p. de reden voor uw bewering in de volgende tekstbox en – indien mogelijk – uw E-mailadres voor verdere vragen.

Perfect partner for iPad

303bassline 20.03.2026

Need tactile knobs and faders for your iOS synths? Look no further. It works perfectly for that use case ;)

Evaluatie melden

Vertaling tonen

Origineel tonen

Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.

Fine controller (with some DIY work)

busy_b 13.02.2020

According to pictures it promised to be nice controller and so it is in reality. It has everything to get familiar with controller use and you don't need to pay much for it. Sliders, rotating knobs are moving light (not too light), everything is made of plastics, but solid.
Included microUSB type B cord with length of mere 80 cm is suitable for connection with nearby laptop at best, not with computer placed by your feet. I agree with other reviewers its connection to controller is of flimsy design - instead of sticking out into space exposed to any harm the small connector should be sunk in some groove of back cover, thus be protected from accidental side blow.
So the first thing for me was to build stronger platform which will hold both controller and connector without the possibility of bending/breaking in contact site. I used plastic board some 5 cm larger on the side of USB input and with the help of double-sided tape I fastened down both controller and connector, the latter I tightly clamp from all sides with small pieces of plastics and tape. The idea is to transpose any harmful force (don't forget the pull) from connector to supporting board.
I'm using Sonar X2 and I was quite uncertain, if nanoKontrol would work with it. As far I can tell, it does – when the controller is implemented into MIDI Devices and Control Surfaces then various soft-synths (based on Play, Engine, Kontakt) respond to the movements of knobs and sliders without doing any setup. Well, some more fully, some less – why it is, I have to find out, I'm new to this topics yet.

Evaluatie melden

Vertaling tonen

Origineel tonen

Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.

Caution if using with Reaper

Nänad 04.01.2021

In principle, hardware is well made, although the cable could've been longer.

However, device seems not to be Reaper Friendly....

- the installation is not really as straight forward as one might hope for. At the end I finally got it to work, but I needed a good couple of hours to figure out everything. And even then it worked barely and non 100 % reliably. For example, after starting the Reaper, there was somewhat of a 50/50 chance that the nanoKONTROL would actually work. Also, not sure if it was a must, but it seemed not to be able to work without the KORG KONTROL Editor running in the background.

- after finally getting it to "work" I have experienced a couple of sudden crashes, that are tbh totally for Reaper. Then, on a few occasions, I had to restart the computer because the Reaper would freeze in NOT RESPONDING mode and wouldn't run. The issue was resolved when I "forgot" the nanoKONTROL Studio in the "MIDI devices" and deleted it from "Control Surfaces".

Final verdict
hardware good, buy a longer cable;
radom DAW + nanoKONTROL = maybe;
Reaper + nanoKONTROL = expect problems (Not Responding)

Evaluatie melden

Alle waarderingen lezen

Korg nanoKONTROL Studio

MIDI-controllers voor mobiele apparaten en computers

88 Klantenbeoordelingen

U moet ingelogd zijn om producten te evalueren.

63 Recensies

Smart Navigator

Met liefde geserveerd!

Korg nanoKONTROL Studio

MIDI-controllers voor mobiele apparaten en computers

Accessoires & verwante producten

88 Klantenbeoordelingen

U moet ingelogd zijn om producten te evalueren.

63 Recensies

Vergelijk opties

Smart Navigator