Naar de inhoud van de pagina

Klark Passiefe DI-Box

  • Bijzonder geschikt voor multimediatoepassingen
  • Midas transformator
  • Ingangen: 2x 6,3mm jack, 1 x 3,5mm minijack (stereo) en 2x Cinch
  • Neutrik XLR-uitgang
  • Pad-schakelaar: -15 dB
  • Groundlift
  • Ingangsimpedantie: 30 kOhm
  • Uitgangsimpedantie: 600 ohm
  • Frequentiebereik: (±1 dB): 20 Hz - 30 kHz
  • Signaal-ruisverhouding: 105 dBu
  • Stevige, compacte aluminium behuizing met beschermende hoeken van hard rubber
  • Afmetingen (B x H x D): 118 x 64 x 112 mm
  • Gewicht: 0,53 kg
  • Leverbaar sinds September 2018
  • artikelnummer 448166
  • verkoopseenheid 1 stuk
  • Multi-Channel Unit Yes
  • Channels 2
  • Active / Passive Passive
  • 19" No
  • Pad switchable Yes
  • Gnd/Lift switchable Yes
  • Powered by battery No
  • Speaker Simulation No
€ 59
Alle prijzen incl. btw
Beschikbaar in een paar maanden
1

Professional signal processing

The Klark Teknik DI 22P is a DI box that, thanks to its first-rate components, makes absolutely no compromises when it comes to processing audio signals: It can get across both external audio input like smartphones or record players, or any instrument's unique character to a mixing desk, where the sound can be further shaped and enhanced. Because the DI 22P is constructed entirely from passive components, it doesn't require an external power source; particularly noteworthy is its special transformer, made by the manufacturer Midas, which is responsible for the high-quality signal processing. The DI 22P is sure to impress professional users working both in the studio and at live events with its robust build quality and reliable functionality.

Klark Teknik DI 22P, sockets

Simple signal paths

The front of the Klark Teknik DI 22P is equipped with a pair of 6.3mm sockets for an unbalanced, high-impedance stereo signal, as well as both a 3.5mm mini-jack and a pair of cinch sockets. When a signal is present at the input, it can be output from the two XLR sockets on the rear of the unit. To the right of the inputs, there is a pad switch that attenuates the signal passing through to the XLR sockets on the rear by 15dB, and to the right of this is an earth/lift switch to separate the input and output grounds from one another, thus suppressing unwanted hum; there is another earth/lift switch between the XLR sockets on the rear of the device.

Klark Teknik DI 20P passive stereo DI box

Road-ready, robust, and reliable

The Klark Teknik DI 22P can connect stereo keyboards, samplers, or synths – as well as other electronic instruments and external audio sources like smartphones or record players – to a mixing desk, making it a trusty companion for event techs and studio engineers who want to able to record their musicians with negligible loss of signal level. The 6.3mm jacks can also be used as parallel thru outputs. All the electronics housed in the DI 20P are well-protected thanks to the sturdy aluminium casing and the hard rubber corner protectors, which also give the device a very robust look. This is a professional DI box that's ready for the road.

Klark Teknik DI 22P, 6.3mm sockets

About Klark Teknik

Founded in 1974 by brothers Terence and Phillip Clarke, Klark Teknik designs and manufactures professional audio equipment used primarily in the events industry. Based in Kidderminster, Worcestershire, UK, the company has developed a number of innovative products in the audio field (including the DN60 Real Time Analyzer and the DN300 Graphic Equalizer) and it won one of the Queen's Awards for Enterprise in 1986. Today, the firm (along with Midas) is owned by the Music Group, to which Behringer also belongs.

No need to compromise

It's the exceptional electronics inside this little device that allow the Klark Teknik DI 22P to process signals so immaculately. The first incredible spec is its THD value: 0.01% at 1kHz. The frequency response goes from 20Hz to 30kHz, with a 1dB tolerance. All the inputs and outputs are designed to ensure the highest levels of signal integrity – for instance, the premium XLR jacks from renowned manufacturer Neutrik. The DI 22P's input impedance is 30 kiloohms, with 600 ohms on the outputs. The signal-to-noise ratio is 105dBu, meaning the device's inherent noise is extremely low. And finally, the DI 22P's weight of just 530 grams means it is also incredibly portable.

120 Klantenbeoordelingen

4.8 / 5

features

geluid

afwerking

54 Recensies

MK
Veelzijdige DI
Mark Kloosterhuis 04.10.2020
Stereo DI met veel aansluitmogelijkheden en daardoor ruim inzetbaar. Robuuste behuizing en robuuste knoppen. Met de mini Jack moet je natuurlijk wel voorzichtig zijn.
features
geluid
afwerking
0
0
Evaluatie melden

Evaluatie melden

HB
Geweldig product.
Henk Bakker 27.08.2022
Wat een super ding dit zeg.
features
geluid
afwerking
0
0
Evaluatie melden

Evaluatie melden

DA
Zoals je gewend bent van Klark
De Avenue 20.06.2024
Sterk, robuust, en technisch goed, minder fan van de tuimelschakelaars.
Maar voor de prijs goed.
features
geluid
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
TM
A great budget friendly stereo DI
Theodore Miller 30.09.2020
I bought one of these to live with a Pro2c front of house package, Just to always have a simple way of getting background music into the desk without nicking a DN200 off of stage, and for this it works flawlessly!

I will be mainly comparing it to the DN200 as those are the only other stereo di i own, so at one third of the price, the DI22P Starts off stronger.
It was only after purchasing that i realised the 22P is passive instead of active, meaning that you don't need phantom power for it to work, this is not a feature i need now but could well see me out of a pinch one day! The only downside to this is not having those reasuring pair of blue lights to let you know that its deffo the musicians fault we can't hear him.

For inputs the 22p has a pair of rca in, a pair of quarter inch mono ins, and an eighth inch stereo in.
Personally i've only tested the quarter inch ins, but i can see the other two inputs being useful to get out of a pinch.
Compare that to the DN200 which has a pair of rca's, and a pair of xlr/jack combi inputs. So the DN200 allows you to plug full sized xlr's in which is nice, but you lose the 1/8th" input, which once again might sort you out when you forget all your adapter cables, but there's an aux in the van you can nick.

For outputs you only get a pair of XLR balanced outputs on the 22P, lacking any Link/Thru jacks. Again this isnt an issue for most use cases, but id always rather have them and not need them than the other way around.

One of the big downfalls of the 22P in my opinion is the lack of 'Split' button, it's also missing the 'sum' feature of the DN200 but i'm not sure i've ever actually used that button so that is less of an L imo

The 22P Features a -15 pad, but the dB reduction is not listed on the box itself, a minor inconvenience, it just reads 'Pad' on the box.
In comparison the DN200 clearly reads '-20 dB PAD' With a helpful red light to alert you of this fact.

It also comes fully equipped with not one, but TWO Earth Lift switches! Mental right?
Haven't the foggiest what the second one is for, and i dare not switch both of them at the same time for fear of breaking the matrix, but at least now you can earth lift from either side of this tiny DI box.

All in all a great box for the price, but i wouldn't populate a whole stage with them. Build quality is good, but leaves a lot to be desired when compared to its bigger brother, the DN200
features
geluid
afwerking
5
0
Evaluatie melden

Evaluatie melden