Naar de inhoud van de pagina

Flyht Pro Case for 19" 3U DMX Controller

4.4 van de 5 sterren van 124 klantbeoordelingen

Case voor 19" 3 U DMX controller

  • Max. inbouwdiepte: 86 mm
  • Materiaal: 6 mm MDF
  • Beschermingsklasse: IP20
  • Kogelhoeken
  • Afmetingen (L x B x H): 504 x 238 x 116 mm
  • Gewicht: 4,5 kg
  • Kleur: Zwart
  • Leverbaar sinds Juli 2016
  • artikelnummer 392412
  • verkoopseenheid 1 stuk
  • Vertical HE 3 U
  • Colour Black
  • Material MDF
  • Case category Light controller 19"
  • Locks And Catches 1x Butterfly
  • Number of fixtures 1
  • Design of compartment 3U 19"
  • External Width [mm] 238 mm
  • External Height [mm] 116 mm
  • External Depht [mm] 504 mm
  • Weight 4,5 kg
  • Folding handles 0
  • Lock 1x Butterfly
  • Strap handles 1
  • Special equipment No
€ 55
Alle prijzen incl. btw
Direct leverbaar
1

124 Klantenbeoordelingen

4.4 / 5

stabiliteit

hanteerbaarheid

afwerking

64 Recensies

J
Prima kistje voor het geld, wel soms wat aanpassingen nodig
Johan1983 11.01.2020
Mooi kistje voor de welbekende scanmaster tafeltjes. stevig en knap afgewerkt. Ik kan me niet helemaal vinden in de negatieve reviews van sommige, want voor dit geld vind ik het niet erg als een gaatje niet precies op de juiste plek zit. (gewoon even opnieuw boren)
Een beetje handigheid is dus wel nodig wij deze case.
stabiliteit
hanteerbaarheid
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
A
Was expecting more
Anoniem 21.03.2017
Overall..poor craftsmanship with hammered corrections and slightly crooked joints on some places allover in the item...i did spent some time realigning stuff left and right, just for the looks...but most importantly...my 3U controller was sitting too low on the pre-drilled holes blocking the case joints and lid did not close at all for that...

Redrilling the holes further up just enough did the trick, but now controller upper edge is almost touching the wood surface of the lid, making stacking the case among other staff questionable....in other words the rack base wood inside the controller sits on, either needs trimming or replacement for peace of mind and road abusing the case. On top of that....whole lids right side was slightly misaligned on closure, compared to the left that was properly fitted...

i should have bought the Thomman case for 25 euro more, seems a much better quality choice really, after revisiting its page.
stabiliteit
hanteerbaarheid
afwerking
1
2
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
TP
Good Product.
Tony Pauer 05.06.2025
I’m completely satisfied with this case. Everything went perfectly—the case is sturdy, and my DMX controller, which is actually the most common and inexpensive model, suddenly looks like a professional device in it. Yes, I could make such a case myself, but just the materials here in the Czech Republic would cost twice as much as what I paid for this ready-made one. This case is not only safe, but also very attractive—and truly at a great price. Many thanks to Thomann.de!
stabiliteit
hanteerbaarheid
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
m
It does what is says it does
manosg 24.11.2018
You get what you see in the photos. No rack rails, just 2 pieces of wood to hold down your controller. It is road worthy, it is an inexpensive case meant to accommodate an inexpensive dmx controller, all is good here
stabiliteit
hanteerbaarheid
afwerking
0
0
Evaluatie melden

Evaluatie melden