Naar de inhoud van de pagina

Fender Stealth String Retainer Bass

4.4 van de 5 sterren van 48 klantbeoordelingen

Stealth String Retainer

  • Past op de meeste vintage en moderne vier- en vijfsnarige fender basgitaren
  • Elimineert snaar gezoem op de elektrische basgitaar
  • Vergroot de hoek tussen het stemmechanisme en de brugzadel, voor meer spanning, een zekere houding en meer stabiliteit
  • De beugel vervangt ook de ring op de stemmechaniek bij de B, E of A snaar en maakt extra hardware montage overbodig
  • Wordt gebruikt op de meeste American Deluxe en Dimension basgitaren
  • Leverbaar sinds September 2017
  • artikelnummer 419044
  • verkoopseenheid 1 stuk
€ 16,90
Alle prijzen incl. btw
Direct leverbaar
Direct leverbaar

Dit product is op voorraad en kan direct verzonden worden.

Informatie over de verzending
1

48 Klantenbeoordelingen

4.4 / 5

U moet ingelogd zijn om producten te evalueren.

Note: Om te voorkomen dat evaluaties gebaseerd zijn op roddel, geruchten of heimelijke advertentie staan wij op onze website alleen evaluaties toe van daadwerkelijke gebruikers die het geevalueerde product bij ons gekocht hebben.

Na inloggen vindt u alle producten die u kunt evalueren ook onder “Product evalueren” in uw klantencentrum.

afwerking

31 Recensies

B
Duur ding
BassGuy 05.04.2018
Doet wat die moet doen. Alleen soms zit die niet voor niets niet standaard op je vijfsnarige Precision... ik heb ermee getest en toen snel weer eraf gehaald. Ging ten koste van het geluid.
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
b
Works as advertised but pricey
basadam 27.09.2019
This is specifically for Fender American basses that use threaded nuts but I'm told it works equally well with Hipshot Ultralites. It works as advertised to increase the break angle between nut and tuner. It seems sturdy enough not to break or bend under pressure.

With the old style tapered (not fluted-shaft) tuners the improvement was marginal at best, carefully winding the string around the post will fix most (if not all) problems without needing this piece of gadget.

But the fluted-shaft tuners seem to have an inherent problem, in which the string sits higher than desired no matter what. Stealth retainer really helps with these tuners, which brings the question: Should Fender charge separately for something that fixes their design problem?

In summary, this is a quality product which does what it's supposed to do but it should be available at a lot less price.
afwerking
3
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
Tt
Only for tuners with top side big screws
Tamas the Tamas 05.03.2023
The purpose of this thing is to keep the lower strings in place on a Precision Bass headstock, becasuse the guitar desing results very straigth string laying. When playing hard, the low strings may jump out from the nut. As I had this problem, I decided to buy the string retainers, originally for a Squire CV70 bass. The tuners of that guitar are simply pressed and glued into position with the small screw on the back side. Also the Squire tuners diameter is bigger than the retainers, so had to enlarge the holes. This cased some scratches (my bad, though!). When I finished assembling the string retainers and tuned again the strings, the tension picked up the unfixed retainers and resulted a disaster look.
Later moved the retainers onto a Fender American Performer. Its tuners have big fixing screws on the headstock top side and these screws helped keeping the retainers in place. And in this case they work perfectly, provided a good slope for the lower strings, so they did not jump out from the nut during playing.
The tuners' mechanic is recommended to consider before purhasing the retainers. If OK, just buy it and enjoy the slope of the E-A strings.
Recommended.
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
JV
A nice stealthy Fender drop-in solution
Jernej V. 06.02.2021
I ordered this product for my Fender USA Standard 2005 Bass.

It was a direct replacement for the washer on the tuner. The product works well enough, it corrects the string angle making it closer to other strings. The angle could be a bit steeper but the functionality is not compromised.

CON: The angle could be a bit steeper.
PRO: It works nontheless.
afwerking
1
0
Evaluatie melden

Evaluatie melden