Naar de inhoud van de pagina

Pop Filter

  • Wasbaar filter van roestvrij staal
  • Met hexagonale "Hextech" filteropeningen
  • Mat zwarte, rubberen zwanenhals met bevestigingsklem
  • Bedrukt met Aston Microphones logo
  • Leverbaar sinds Mei 2018
  • artikelnummer 431405
  • verkoopseenheid 1 stuk
  • Component type Popkiller
€ 49
Alle prijzen incl. btw
Direct leverbaar
1

95 Klantenbeoordelingen

4.6 / 5

afwerking

57 Recensies

K
mooi en praktisch
Klppnbrgh 13.06.2020
Staat mooi bij mijn Aston Spirit microfoon. Flexibel in te zetten. Makkelijk monteren en aanpassen door de klem en buigbare zwanenhals. Het filter is mooi en werkt perfect.
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
J
Aesthetically Pleasing & Highly Functional
JChong 20.11.2020
Needed to swap out my old K&M pop filter which had the meshing tearing. I'd figured I could change out the mesh with some stocking from the dollar store but hey, it's a good opportunity to get a sturdier and nicer looking one.

Looked around for alternatives and I've always been impressed with Aston's pop filters; they look slick and are high functional. Took the dive and ordered this along with my Brauner microphone in the same order. When it came I was surprised how sturdy the gooseneck is. The only drawback was that it's really really really STIFF. A good thing though. Also I'm not a huge fan of the clamp, I would have preferred the ones with a screw which you can tighten onto the microphone stand but the clamp seems tough enough. Only time will tell if the spring loosens up or gives way. Also if the rubber bushings give way it's not going to hold anymore unless you replace it.

Tried it out, excellent pop rejection. It's almost near zero before and after and I don't notice much of a difference in the top end. Some pop filters sort of deaden the top end with too thick of a mesh, other's have very poor plosive rejection (*cough* like the K&M *cough*) but this impressed me.

If any I would have considered the shockmount with the pop filter but the Brauner mics come with their own really nice proprietary shockmount so that might be a purchase few years down the road.
afwerking
1
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
G
The best
Gerardo9838 06.01.2026
The best pop filter I have ever had. It's solid and it protect from all the strong consonant.
afwerking
0
0
Evaluatie melden

Evaluatie melden

google translate gb
Helaas is er een fout opgetreden, probeert u het a.u.b. later nogmaals.
s
Seems well made
steadyokay 01.10.2020
Sound is unique, sometimes though if your set-up isn't very good you'll notice a metallic sound to your voice. Keep in mind, this happens with basically every bad set-up though, so not necessarily the shield.

I have moved it a lot and unfortunately it's pretty loose now, as every other kinda cheap pop filter. I place it in front of the mic and as soon as I let go, it tilts further down.

There's a slight chance that due to its design I can screw it in harder or something, but it seems to be the snake is just broken.

I'd still recommend as I think it's mostly my fault and the constant moving from one studio to the other that broke it somewhat.
afwerking
2
1
Evaluatie melden

Evaluatie melden